Receiving and washing
Washing and Elevator System
A water-bath washing section feeds an inclined cleated elevator so draining and the next inspection stage can share one controlled hand-off.
View equipment details →PROCESSING LINE · SELECTED FOR YOUR PRODUCT
Kiwifruit Juice Processing Line
Plan a kiwifruit juice line for cloudy juice or a selected separation duty. Coordinate fruit preparation, extraction, treatment and the required bulk package.
YOUR INCOMING MATERIAL
Prepared fruit, pulp or a suitable liquid feed.
YOUR FINISHED PRODUCT
Cloudy juice, beverage base or a selected separated liquid.
THE PROCESS, STEP BY STEP
How the line comes together.
- 01
Establish the inlet
State whether the project starts with whole fruit, prepared pulp or a pumpable liquid.
- 02
Create the liquid feed
Select the preparation and extraction interface before sizing downstream equipment.
- 03
Separate when required
Use a measurable product target before including the conditional separator.
- 04
Balance and treat
Coordinate solids, viscosity, tanks, transfer and the project validation boundary.
- 05
Package
Match outlet condition to the selected bulk bag and downstream storage chain.
EQUIPMENT IN THIS ROUTE
Choose the machines for each duty.
Inspection and transfer
Manual Sorting Conveyor
A sanitary belt presents one visible flow for operators to remove unsuitable fruit before preparation.
View equipment details →
Pulping and finishing
Two-Stage Pulper and Finisher
One combined assembly provides two sequential processing duties on a shared frame for prepared fruit or pulp.
View equipment details →
Optional liquid separation
Conditional Liquid Separator
A separator-type module can be reviewed after a suitable liquid feed has been established and a measurable separation target is available.
View equipment details →
Buffering and line balance
Process and Buffer Tanks
Stainless process tanks provide controlled hold-up between discontinuous and continuous duties when volume and product conditions are defined.
View equipment details →
Product treatment
Thermal Processing System
A skid with tube banks, vessels, valves, pumps and controls provides a project-specific treatment platform for an agreed product and package boundary.
View equipment details →
Bulk packaging
Two-Head Aseptic Bag Filler
A two-head filling family arranges two roller lanes beneath the product and service pipework for bulk bag-in-drum operation.
View equipment details →
Closed-circuit cleaning
Three-Tank CIP System
A three-tank skid with pumps, valve manifold, pipework and controls supplies repeatable cleaning circuits for compatible closed product equipment.
View equipment details →CLOUDY JUICE OR A SEPARATION DUTY?
Let the product define the route.
Confirm the extraction method, suitable liquid feed and the result you need before selecting separation. The listed separator is not a membrane filtration system; any additional filtration requirement is specified separately.
Explore separation requirements →What to send with your enquiry
Tell us your incoming material, capacity per hour and its measurement point, target product, package and project country. Utilities and the operating schedule help develop the selected equipment duties.
What to include in the proposal
Ask for the process flow and equipment list, with controls, utility connections, cleaning, documentation and inspection responsibilities. Installation, commissioning and service activities should be identified in the quoted scope.
START WITH THE PRODUCT YOU WANT TO MAKE
Let's find the right route for your project.
Share your incoming material, production target and package. Request a focused proposal for the equipment and connections you need.
Discuss your requirements →A short enquiry is enough to begin.